.xx: .01 [.3] 2 .xxx: .005 [.13] .xxxx: .0020 [.051] decimals angles tolerances are: unless otherwise specified, dimensions are in inches. do not scale from this print sqw-1xx-01-xxx-d-vs-xx-xxx no of positions -02 thru -50 (per row) tail style -vs: vertical lead style -01 plating specification -f: 3" flash selective gold in contact area matte tin on tail -l: 10" light selective gold in contact area matte tin on tail -s: 30" selective gold in contact area matte tin on tail -stl: 30" selective gold in contact area tin/lead (93/7+/-5%) tail -h: 30" heavy gold in contact area 3" on tail -fm: 3" flash selective gold in contact area matte tin on tail -lm: 10" light selective gold in contact area matte tin on tail -sm: 30" selective gold in contact area matte tin on tail option -a: staked & molded in alignment pin (5 pos min) (use sm-a8h, see fig 3, sht 2) -lc: locking clip (5 pos min) (use lc-07-tm, see fig 4, sht 2 & note 8) -p: pick & place pad (4 pos min) (use lmp-03, see fig 6, sht 2) -tr: tape & reel (available pos 4 thru 28) -k: polyamide film pad (4 pos min) (use k-500-300, see fig 7, sht 2) (.005 [.13] thickness with silicone adhesive) row specification -d: double (use sqw-xx-d) -xxx: indicates position polarized (use pk-07-n, see fig 2, sht 2) polarization option ae .015 0.38 ref .203 5.16 ref .0197 ref (typ) 0.500 .250 6.35 ref .059 1.50 ref 2 max sway (either direction) c-97-01-xxx fig 1 sqw-110-01-xxx-d-vs shown ((no of pos x .07874 [2.000]) + .0117 [.297]) .010 [.25] (no of pos x .07874 [2.000]) - .07874 [2.000] ref .157 4.00 ref .07874 2.0000 ref 2 max sway (either direction) c 01 02 .0500 1.270 (see note 7) .034 ref 0.87 .015 ref 0.37 .187 ref 4.75 90 - 0 + 4 sqw-xx-d c .006[.15] .0900 2.286 c in-process c ae ae sheet of material: 2mm sockets trip assembly by: sqw-1xx-01-xxx-d-vs-xx-xxx dwg. no. description: proprietary note this document contains information confidential and proprietary to samtec, inc. and shall not be reproduced or transferred to other documents or disclosed to others or used for any purpose other than that which it was obtained without the expressed written consent of samtec, inc. do not scale drawing dean p 04/22/1997 3 1 sheet scale: 4:1 insulator: lcp, ul 94 vo, color: black terminal: phosphor bronze f:\dwg\misc\mktg\sqw-1xx-01-xxx-d-vs-xx-xxx-mkt.slddrw notes: 1. represents a critical dimension. 2. positions -04 thru -50 are to be tubed. 3. positions 02 & 03 are to be layered packaged. 4. maximum cut flash: .010[.25]. 5. staked alignment pin used at samtecs discretion. 6. measure the height from the edge, not the break off. 7. measured at bend radius, not end of pin. 8. due to the high amount of insertion force needed, the -lc option is not compatible with auto placement. samtec recommends manual placement for all assemblies with the -lc option. 520 park east blvd, new albany, in 47150 phone: 812-944-6733 fax: 812-948-5047 e-mail info@samtec.com code 55322 revision ae
.035 0.89 (see note 6) sm-a8h fig 3 -a: staked alignment pin (5 pos min) sqw-110-01-xxx-d-vs-a shown (different as shown, otherwise same as fig 1) ae .0350 ref 0.889 fig 5 -a: molded alignment pin (5 pos min) sqw-110-01-xxx-d-vs-a shown (different as shown, otherwise same as fig 1) ae .056 ref 1.42 - .1575 [4.000]} .002 [.51] {(no of pos x .07874 [2.000]) c .050 1.27 .010 ref 0.25 lc-07-tm fig 4 -lc: locking clip (5 pos min) sqw-110-01-xxx-d-vs-lc shown (different as shown, otherwise same as fig 1) ae .225 ref 5.72 + .0117[.297]}/2} - .1125 [2.858] {(no of pos x .07874 [2.000]) .308 7.82 c l fig 6 -p: pick & place pad (4 pos min) sqw-110-01-xxx-d-vs-p shown (different as shown, otherwise same as fig 1) .202 ref 5.13 c l "r"(see note) "s"(see note) .1673 .0050 4.250 0.127 c l note: "r" = used measured dimension (ref) "s" = {("r" - .1673 [4.25]) / 2}.020 [.51] .305 7.75 c l fig 7 polyamide film pad (4 pos min) sqw-110-01-xxx-d-vs-k shown (different as shown, otherwise same as fig 1) 01 14 02 fig 2 polarization option location insert pk-07-n into specified position and break off tab sqw-110-01-xxx-d-vs-014 shown (different as shown, otherwise same as fig 1) ae .0430 ref 1.092 - .1575 [4.000]} .002 [.51] {(no of pos x .07874 [2.000]) c sheet of 2mm sockets trip assembly by: sqw-1xx-01-xxx-d-vs-xx-xxx dwg. no. description: proprietary note this document contains information confidential and proprietary to samtec, inc. and shall not be reproduced or transferred to other documents or disclosed to others or used for any purpose other than that which it was obtained without the expressed written consent of samtec, inc. do not scale drawing dean p 04/22/1997 3 2 sheet scale: 4:1 revision ae f:\dwg\misc\mktg\sqw-1xx-01-xxx-d-vs-xx-xxx-mkt.slddrw 520 park east blvd, new albany, in 47150 phone: 812-944-6733 fax: 812-948-5047 e-mail info@samtec.com code 55322
pt-1-24-03-09 tp-09 tube view ae parts to come off reel as shown with pockets facing up position 1 user direction of unreeling pocket not detailed tape & reel view ae unwinding direction reel ae unwinding direction loose end of reel sheet of 2mm sockets trip assembly by: sqw-1xx-01-xxx-d-vs-xx-xxx dwg. no. description: proprietary note this document contains information confidential and proprietary to samtec, inc. and shall not be reproduced or transferred to other documents or disclosed to others or used for any purpose other than that which it was obtained without the expressed written consent of samtec, inc. do not scale drawing dean p 04/22/1997 3 3 sheet scale: 4:1 revision ae f:\dwg\misc\mktg\sqw-1xx-01-xxx-d-vs-xx-xxx-mkt.slddrw 520 park east blvd, new albany, in 47150 phone: 812-944-6733 fax: 812-948-5047 e-mail info@samtec.com code 55322
|
